Table of Contents
Advertisement
MAINTAINING THE SPARK PLUG
1. Turn the start lever to the OFF position to
turn off the product.
2. Remove the spark plug cap. Remove the
spark plug using a spark plug wrench or
socket.
3. Inspect the spark plug for damage,
and clean it with a wire brush before
reinstalling.
4. Seat the spark plug in position and thread
it in by hand to prevent cross-threading.
Use a wrench to tighten the spark plug to
26 Nm torque. Cover the spark plug with
the spark plug cap.
NOTE: If the insulator is cracked or
chipped, replace the spark plug. The
recommended spark plug models are
TORCH F7RTC or NGK BPR7ES.
12
Maintenance
1
2
1
2
3
1
4
1
2
3
2
Advertisement
Table of Contents
