Ryobi RPGENINV4K Manual page 6

1
Align the rubber foot bracket with the
holes in the frame.
6
Remove the oil cap. Add lubricant as needed. Close and secure the oil tank.
NOTE: Turn the start lever to the OFF
position to turn off the product.
6
Getting started
2
1
3
Insert bolts through the rubber foot
bracket, then through the frame.
Thread lock nuts onto the bolts and turn
clockwise to tighten.
1
3
2
4
3
2
Position the axle on the frame so that it
aligns with the hole in the frame.
7
1
5
Turn the fuel cap counterclockwise to
open the fuel tank.
2