Ryobi RPGENINV4K Manual page 10

5. Disconnect the device from the AC outlet
then press the overload reset button, wait
for the product to function normally, and
connect the appropriate load.
OPERATING THE SINGLE OUTPUT
SWITCH
1. Connect the device to be powered to the
AC outlet.
NOTE: The single output switches control the
output in the corresponding AC outlets above
them. If these are in the OFF position, the
current is too high.
2. Disconnect the device from the AC
outlet, then turn the start lever to the OFF
position.
10
Operation
5
1
1
2
1
2
2