Electrical Fitment - MacDon FEEDSTORM D60 Operator's Manual

ELECTRICAL FITMENT

Refer to the attached drawing UCA-E01 as support to the detailed instructions for further
information.
STEP INSTRUCTION
1 Connect the shorter portion of
Electrical Wiring Harness, 11B to the
four Actuators, 11A.
The slightly shorter (by approx.
100mm) cables plug into the "RAISE
AND LOWER" Actuators. The longer
cables plug into the "FORE AND AFT"
Actuators. Connections are colour
coded with cable ties.
2 Fix the Remote Controller
Subassembly, Part 11D, to a
preferred location in the header
cabin. Choose an accessible location
to the operator whilst driving.
3 Fix in a suitable location and
hardwire the Voltage Converter, Part
11C, to the header power source.
Ensure the power source provides 40
Amps at 12 Volts, to the converter.
REFERENCE IMAGE
22