Sound Clip Upload 1 To 3 - Canon VB-H47 Operation Manual

Hide thumbs Also See for VB-H47:
Table of Contents

Advertisement

HM4x S32VE
[Audio Reception from Viewer]
Select whether to receive audio from Camera Viewer.
Received audio can be outputted from a speaker with an amplifier connected to the camera.
Network

Sound Clip Upload 1 to 3

HM4x S32VE
It is possible to upload up to three sound clips for playback when an event is triggered.
Note
• The sound clip is used for the [Event] tab (P. 119) when setting the audio playback in [Event] > [External Device] > [External Device
Input] (P. 121) or [Detection] > [Intelligent Function].
[Browse File]
Specify the sound clip to upload and click [Add].
For a sound clip that can be uploaded, the following requirements must be satisfied.
• Playback length: less than 20 seconds
• File Format: ".wav" (µ-law PCM 8bit. sampling frequency 8000 Hz, monaural)
If [Apply] is clicked without entering information, the sound clip registered in the camera will be deleted.
To delete a sound clip uploaded by [Add], click [Delete] next to the name of the sound clip.
[Sound Clip Name]
Enter the name of the sound clip to upload.
Be sure to enter the sound clip name.
94

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb-m46Vb-s32veVb-s32dVb-s820dVb-s920f

Table of Contents