List Of Log Messages; Log Messages On The Camera; Error Log - Canon VB-H47 Operation Manual

List of Log Messages

Log Messages on the Camera

This is the list of log messages displayed in [Maintenance] > [Log] > [View Logs] on the Settings page (P. 158).
Log messages are categorized as follows.
Category Level
crit Error
err Error
warning Warning
notice Warning
info Information
Note
• If no content is recorded in the log for approximately two hours, "-- MARK --" will be recorded in the message area.

Error Log


System Error
S302 Error on saving settings [err]
Description Can't update system settings (S302)
Meaning An error generated while the system
was saving a setting. Setting could not
be saved.
Countermeasure Provide enough memory space by
deleting unnecessary files in the user
memory area, etc.
S303 Error on saving settings [err]
Description Can't update files of system settings
(S303)
Meaning An error generated while the system
was saving a setting. Setting could not
be saved.
Countermeasure Provide enough memory space by
deleting unnecessary files in the user
memory area, etc.
Code
4xx Software-level failure (Task operations will stop)
3xx Operational error (Operations will continue)
2xx Non-operational error
1xx Error external to the system
0xx Information on normal operation
Fault level
S307 Error on saving settings [err]
Description
Meaning
Countermeasure
S310 Operation error in event service [err]
Description
%1
%2
%3
Meaning
Countermeasure
166
(vbadmin.c XXX) Can't update system
settings (S307)
An error generated while the settings
were being saved by the settings
protocol. Setting could not be saved.
Provide enough memory space by
deleting unnecessary files in the user
memory area, etc.
cannot work event [%1][%2][%3]
(S310)
Error number
Cause of error
Error information
An error occurred while the event
service was running.
If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon's sales/service representative.