Snmp V1 And V2C Server; Snmp V3 Server - Canon VB-H47 Operation Manual

[Administration Function Name]
Enter the camera name used for administration. Setting information can be referenced by the SNMP Manager.
If left blank, the camera model name will be used.
[Installation Location]
Enter information regarding the installation location of this camera. Setting information can be referenced by the SNMP
Manager.

SNMP v1 and v2c Server

[Community Name]
If [Enable] is selected for [Use SNMP v1 and v2c], enter the community name to use for SNMPv1 and v2c. The factory
default setting is blank.

SNMP v3 Server

[User Name]
If [Enable] is selected for [Use SNMP v3], set the user name to use with SNMP v3.
[Security Level]
Select the security level to use for SNMP v3.
[Authentication Algorithm]
If [Authentication but no encryption] or [Authentication and encryption] is selected for [Security Level], the authentication
algorithm will be displayed.
[Authentication Password]
If [Authentication but no encryption] or [Authentication and encryption] is selected for [Security Level], set the
authentication password.
[Encryption Algorithm]
If [Authentication and encryption] is selected for [Security Level], the encryption algorithm will be displayed.
[Encryption Password]
If [Authentication and encryption] is selected for [Security Level], set the encryption password.
132