Canon VB-H47 Operation Manual page 167

S311 Operation error in external input/output
service [err]
Description cannot work extio [%1][%2][%3]
(S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external
input/output device service was
running.
Countermeasure If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon's sales/service representative.
S312 Operation error in timer service [err]
Description cannot work timer [%1][%2][%3]
(S312)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in the timer
service.
Countermeasure If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon's sales/service representative.
S320 PAN/TILT operation error [err]
Description %1 error occurred. [%2] (S320)
%1 PAN | TILT
%2 Warning details
Meaning An error occurred while PAN/TILT was
running or stopped.
Countermeasure Check that the camera is not touching
the dome, etc.
If the error is not caused by problems
such as contact with peripheral items,
the camera could be faulty. Contact a
Canon's sales/service representative.
S391 Imaging system error [err]
Description input 0: [%1] time asserted: code [%2]
(S391)
%1 Number of detection
%2 Cause of error
Meaning Image may not have been captured
correctly, recovery processing was
performed.
Countermeasure If the problem persists, the camera
could be faulty. Contact a Canon's
sales/service representative.
S410 Event service initialization error [crit]
Description
%1
%2
Meaning
Countermeasure
S411 External input/output service
initialization error [crit]
Description
%1
%2
Meaning
Countermeasure
S412 Timer service initialization error [crit]
Description
%1
%2
Meaning
Countermeasure
S413 Timer service runtime error [crit]
Description
%1
Meaning
Countermeasure
167
event initialization error [%1][%2]
(S410)
Error number
Cause of error
An error occurred in the initialization of
the event service.
If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon's sales/service representative.
extio initialization error [%1][%2]
(S411)
Error number
Cause of error
An error occurred in the initialization of
the external input/output device
service.
If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon's sales/service representative.
timer initialization error [%1][%2]
(S412)
Error number
Cause of error
An error occurred in the initialization of
the timer service.
If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon's sales/service representative.
timer working error [%1] (S413)
Error number
An error occurred while the timer
service was running.
If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon's sales/service representative.