Log Messages
The VB-C50i/VB-C50iR Log Messages
The Syslog log messages are classified into the following 5 categories. Classification details are
dealt with in the UNIX syslog.
Classification
crit
err
warning
notice
info
■ Camera Server-related Log Messages
●A001 Camera server startup failure (crit)
Message
%1
Explanation
Response
●A002 Protocol initialization failure (err)
Message
%1
Explanation
Response
●A007 View restriction setting error (warning)
Message
Explanation
Response
7-4
Fault Severity
Level
Error
Critical fault at the software level (stops task operation)
Fault involving a malfunction (operation interrupted)
Error
Fault not involving malfunction
Warning
Fault outside the system
Warning
Information on correct operation
Information
no %1 installed
sources | protocols
Capture and initialization of protocols has failed, and the camera server
has failed to start.
If rebooting does not solve this problem, there is a malfunction. Contact an
authorized Canon service representative.
%1 protocol not installed
Protocol type (LS/C | LS/D | LS/H)
Initialization of WebView has failed. The setting information may be corrupted.
Correct the settings or return to factory-shipped settings.
inconsistent view restriction for camera[1]
The view restriction settings are corrupted. The camera control functions
on the affected camera cannot be used.
Restore the factory default settings or reset the view restrictions.