List Of Log Messages; Log Messages On The Camera; Error Log - Canon VB-R13VE Operation Manual

List of Log Messages

Log Messages on the Camera

The list of log messages displayed in [View Logs] in [Maintenance] > [Log] > [View Logs] on the Setting Page (P. 222).
Log messages are classified into the following types.
Category
crit Error
err Error
warning Warning
notice Warning
info Information
Note
If no content is recorded in a log for approximately two hours, "-- MARK --" will be recorded in the message area.

Error Log


System Error
S302 Error on saving settings [err]
Description
Meaning
Countermeasure
S303 Error on saving settings [err]
Description
Meaning
Countermeasure
230
Level Code
4xx Software-level failure (Task operations will stop)
3xx Operational error (Operations will continue)
2xx Non-operational error
1xx Error external to the system
0xx Information on normal operation
Can't update system settings (S302)
An error generated while the system
was saving a setting. Setting could not
be saved.
Provide enough memory space by
deleting unnecessary files in the user
memory area, etc.
Can't update files of system settings
(S303)
An error generated while the system
was saving a setting. Setting could not
be saved.
Provide enough memory space by
deleting unnecessary files in the user
memory area, etc.
Fault level
S307 Error on saving settings [err]
Description (vbadmin.c XXX) Can't update system
settings (S307)
Meaning An error generated while the settings
were saved by the setup protocol.
Setting could not be saved.
Countermeasure Provide enough memory space by
deleting unnecessary files in the user
memory area, etc.
S310 Working error in event service [err]
Description cannot work event [%1][%2][%3]
(S310)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the event
service was running.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.