Data Aire gForce Ultra Installation, Operation & Maintenance Manual page 95

z. Optional Sensor #2: Choose Name:
aa. Optional Sensor #3: Hot Gas Temp:
bb. Optional Sensor #4: Choose Name:
cc. Optional Sensor #5: Cond Sup Temp:
dd. Analog Output Config:
ee. Analog Output Config: Fan Speed:
ff. I/O Module:
gg. I/O Module:
dap4 Settings for Ultra Units
Enable: Off (Default)
Channel: U03 (Default)
Normal: 4-20mA (Default)
Minimum: 0.0 (Default)
Maximum: 1000 (Default)
Offset:
0.0F (Default)
Value:
0.0F
Enable: On
Channel: U06 (Default)
Normal: PT1000
Minimum: 0.0 (Default)
Maximum: 100.0 (Default)
Offset:
0.0F (Default)
Value:
0.0F
Enable: Off (Default)
Channel: U08 (Default)
Normal: NTC (Default)
Offset:
0.0F (Default)
Value:
0.0F
Enable: Off (Default)
Channel: B2 (Default)
pCOe Module: NTC (Default)
Offset:
0.0F (Default)
Value:
0.0F
Optional Output #2 NOTE: Variable speed compressor limit
Channel: Y5 (Default)
Action: DIRECT (Default)
Minimum: 2.00 VDC
Maximum: 8.50 VDC
Channel: Y3
Action: Direct
Minimum: 0.00vdc
Maximum: 10.00vdc
Liq Line Temp: Not Used
Value:
32.0F
Liq Line Prs:
Not Used
Value:
0 psi
Minimum:
0 psi
Maximum:
650 psi
Discharge Pressur: Enabled
Value: Displays actual reading
Minimum: 0psi
Maximum: 650psi
95
(Reading, not a setting)
(Reading, not a setting)
(Reading, not a setting)
(Reading, not a setting)
gForce Ultra IOM