Data Aire gForce Ultra Installation, Operation & Maintenance Manual page 114

(NOTE: Maintenance/inspection items are monthly unless otherwise specified.)
☐ Inspect element (and clean if required)
☐ Check wiring
☐ Record amps
Condensers (Water-Cooled)
☐ Check for water/glycol leaks (in the piping area)
☐ Water regulating valve function
☐ Entering/leaving water temperatures: Entering T
Compressor (Monthly)
☐ Check for oil leaks
☐ Check compressor mounting
☐ Inspect wire connection
Compressor (Quarterly)
☐ Record suction pressure
☐ Record discharge pressure
☐ Record superheat
☐ Record sub-cooling
☐ Check high pressure cut-out
☐ Check low pressure cut-in
☐ Check low pressure cut-out
☐ Record compressor amp draw
MAINTENANCE/INSPECTION CHECKLIST
A
Compressor 1
L1
L2
L3
☐ Check for lines (leaks/lines secure)
☐ Check capillary lines
Condensate Pan and Pump (if equipped)
☐ Check for leaks
☐ Check for debris
☐ Inspect/check float operation
☐ Check pump operation
°F Leaving
Compressor 2
PSIG
PSIG
°F
°F
PSIG
PSIG
PSIG
A L1
A L2
A L3
114
gForce Ultra IOM
°F
PSIG
PSIG
°F
°F
PSIG
PSIG
A
A
A