Table of Contents
Advertisement
TROLLEY ASSEMBLY (CONTINUED)
6.
Install the 2pcs rear M6x10 round head screws in the hole at the bottom of the BBQ body. Only screw them in
about ½ way at this stage.
7.
Align the bottom screw of the BBQ body with the holes in the top of the trolley, then insert it in place to make the
body sit on the top of the trolley completely.
8.
Push the BBQ body back on the trolley so that the rear panel of the BBQ body is flush with the rear panel of the
trolley.
9.
Install the other 4pcs of M6x10 screws from the underside of the trolley top, then tighten all 6pcs of the M6x10
round head screws, so that the BBQ body is secured tightly to the trolley.
8
Advertisement
Table of Contents
