Gasmate BQ3465 Manual

Gasmate BQ3465 Manual

Caterer 6 burner bbq

Advertisement

Quick Links

CATERER
6 BURNER BBQ
Model No. BQ3465
LCC27 REGULATOR SUPPLIED
This LCC27 Regulator can only be used with the new safer industry standard LCC27 Gas Cylinder Connection.
OUTDOOR USE ONLY
Important: Retain these instructions for future use.
Gasmate
is a registered trademark of Sitro Group Australia Pty Ltd www.gasmate.com.au
04730 03/24
®
Aber Living, N.Z. www.gasmate.co.nz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BQ3465 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gasmate BQ3465

  • Page 1 This LCC27 Regulator can only be used with the new safer industry standard LCC27 Gas Cylinder Connection. OUTDOOR USE ONLY Important: Retain these instructions for future use. Gasmate is a registered trademark of Sitro Group Australia Pty Ltd www.gasmate.com.au 04730 03/24 ® Aber Living, N.Z. www.gasmate.co.nz...
  • Page 2: General Information

    SIZE CONSUMPTION THREAD APPROVAL Read these instructions carefully prior to use. materials and the gas cylinder clear of any heat source. Familiarise yourself with the appliance before BQ3465 Propane 2.75 1.05mm 84MJ/h 5/8"-18 UNF AGA 8242 G When changing over from an empty gas cylinder to a full connecting it to it’s gas container.
  • Page 3: For Your Safety

    GENERAL INFORMATION ASSEMBLY INSTRUCTIONS LOCATION OF YOUR BARBECUE FOR YOUR SAFETY DO NOT use your barbecue in garages, porches, • Never lean over cooking surface when lighting. Before assembling the barbecue, read these breezeways, sheds or other enclosed areas. Your Instructions carefully.
  • Page 4 CATERER 6B EXPLODED DRAWING AND PARTS LIST HARDWARE IMPORTANT: REMOVE ANY TRANSIT PROTECTION MATERIAL BEFORE USE. TOOLS: Phillips Head Screwdriver Adjustable Spanner ASSEMBLY INSTRUCTIONS 16 17 STEP 1 Attach the legs to the body using 8 x M6x40mm screws ensuring the side shelf nutserts (circled) are on the outer edge of the legs and the lower support beams using 4 x M6x40mm long screws.
  • Page 5 STEP 2 STEP 4 Attach the handles to the top of the legs using 8 x M5x12mm long screws, then attach the cylinder hanging hook, heat Attach the handle to the lid ensuring the lid hook is oriented as shown on the underside using 2 x M6x12mm screws. shield and fat cup holder as shown using 4 x M6x12mm long screws.
  • Page 6: General Assembly

    GENERAL ASSEMBLY ASSEMBLY INSTRUCTIONS REGULATOR SAFETY FEATURE CONNECTING & DISCONNECTING TO GAS STEP 5 STEP 6 Step 12 Step 12 Step 13 Step 13 SOURCE Step 12 Step 13 The SafeLok LCC27 regulators fitted to this BBQ (the Attach the regulator to your gas cylinder. Attach the regulator to your gas cylinder.
  • Page 7: Operating Procedure

    BURNER OPERATION & IGNITION SYSTEM CHECK 8. Following successful ignition, light the remaining IMPORTANT: burners in sequence, turn control knobs anti- Problem Possible Reason Solution clockwise to ‘HIGH’ starting with the burner closest Check if gas flows out by following the manual If the burner lights up, check if the igniter to the ignition burner.
  • Page 8: Care And Maintenance

    CARE & MAINTENANCE It is recommended that the BBQ is regularly cleaned CLEANING THE FAT CUP STORING THE APPLIANCE and should be serviced at least annually. Servicing must IMPORTANT: To avoid fat or grease dripping from the barbecue remove If the appliance needs to be stored for a prolonged only be carried out by a licensed gas fitter or authorised and empty the fat cup after each use.
  • Page 9 For any queries or assistance call Customer Service (Australia Only) 1300 174 876 Hours of operation: Monday to Friday 8am - 5pm EST Do not return to place of purchase. Keep your purchase receipt, this will be required to make any claims under the 5 year warranty.

Table of Contents