Page 1
NOVA GRAPHITE SINK, BIN AND STORAGE MODULE 3 DRAWER MODULE STORAGE MODULE BQ2192 BQ2193 BQ2191 Important: Retain these instructions for future use. Gasmate® is a registered trademark of 04369 09/21 Sitro Group Australia Pty Ltd www.gasmate.com.au Aber Living, N.Z. www.gasmate.co.nz...
READ ME FIRST GAS LEAK TESTING It is important that you leak test the BBQ before first use and every time the gas cylinder is refilled and reconnected to the BBQ. To Complete Leak Test • Make sure all the control knobs are OFF. •...
GENERAL INFORMATION FOR YOUR SAFETY • Never test for gas leaks with a lit match or open flame. Never light barbecue with hood closed or Failure to comply with these instructions could before checking to ensure the burner tubes are result in a fire or explosion which could cause fully seated over gas valve orifices.
GENERAL INFORMATION Hose & Regulator Safety The regulator and hose assembly supplied with the IMPORTANT barbecue are suitable for Propane Gas. Read these instruction carefully prior to use. A gas regulator adjusted to have an outlet pressure of Familiarise yourself with the appliance before 2.75kPa is supplied for connection to the propane gas connecting it to it’s gas container.
ELECTRICAL INFORMATION To reduce the risk of personal injury or damage to property, follow basic safety precautions IMPORTANT SAFEGUARDS when using this product, including the following: READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT. KEEP • DO NOT use the Product for other than its intended THE INSTRUCTIONS HANDY FOR FUTURE use as described in these instructions.
ELECTRICAL DATA GENERAL ASSEMBLY CONNECTING & DISCONNECTING TO THE IMPORTANT GAS SOURCE This product is fitted with a sealed electrical connection Familiarise yourself with the general information and plug that is compatible with the product, the mains safety guidelines located at the front of this manual. supply for Australia and meets the requirements of DO NOT USE AN ADAPTOR AT THE international standards.
LIGHTING PROCEDURE Burner Operation & Ignition System Check Lighting With Match 1. Turn the control knobs clockwise to “OFF” position. If needed you can light burners using a match and the provided holder. The holder can be found chained to the 2.
OPERATING PROCEDURE Burn-off Roasting The cooking surface does not need any burn-off time For best results when roasting remove the hotplate and after first use. centre the grill. The outer two burners should be used on the low to medium setting. Preheating Adjust the control knob to maintain the temperature It is necessary to preheat the barbecue for at least 5...
CARE & MAINTENANCE Location of your Barbecue Care of Cooking Surface DO NOT use your barbecue in garages, porches, sheds, Use and care of the cooking surface is important. Do not breezeways, or other enclosed areas. Your barbecue is to use pans on the cooking surface.
CLEANING THE BURNER Follow these instructions to clean and/or replace burners. WARNING 1. Turn gas off at control knobs and gas cylinder. Beware of spiders and wasps. Burner tube should be 2. Remove cooking grates and grease tray. inspected and cleaned periodically. 3.
Page 11
EXPANDED VIEW BQ2090 Description Quantity Description Quantity Trolley left panel Main body Trolley right panel Flame tamer Trolley left inner panel Cooking plate Trolley right inner panel Cooking grid Shelf inside cabinet Warming rack Gas bottle holder Side burner grid Trolley bottom panel Fat tray Trolley left door...
Page 12
EXPANDED VIEW BQ2090B Description Quantity Main body Flame tamer Cooking plate Cooking grid Warming rack Side burner grid Fat tray Fat drainage tray Side bracket...
Page 13
EXPANDED VIEW BQ2092B Description Quantity Main body Cooking plate Large Cooking grid Large Cooking plate Small Cooking grid Small Flame tamer Warming rack Fat drainage tray Small Fat drainage tray Large Fat tray Side bracket...
Page 14
EXPANDED VIEW BQ2093B Description Quantity Main body Cooking plate Cooking grid Flame tamer Fat drainage tray Warming rack Fat tray Side bracket...
Page 15
ASSEMBLY INSTRUCTIONS IMPORTANT IMPORTANT: Remove any transit protection material before use. Remove all packing and transit protection before assembly. Tools required: CAUTION: Ensure no packing material is left in BBQ before lighting. STEP 1 Unscrew ignition cap and place a Battery (size AA - not supplied) into place with the (+) end facing outwards.
Page 16
ASSEMBLY INSTRUCTIONS IMPORTANT STEP 1 Remove all packing and transit protection before assembly. Assemble the side bracket and adjustable feet. CAUTION: Ensure no packing material is left in BBQ before lighting.
Page 17
BUILT-IN BBQ DIMENSIONS NOVA GRAPHITE NOVA GRAPHITE NOVA GRAPHITE 6 BURNER BUILT IN 6 BURNER TWIN HOOD 6 BURNER CLASSIC BUILT BUILT IN BBQ IN BBQ Model No. BQ2090B Model No. BQ2092B Model No. BQ2093B 1475mm 1375mm 1105mm 1000mm 100mm 75mm 100mm Ø...
• NATURAL GAS APPLIANCE. TO BE INSTALLED ONLY BY AN AUTHORISED PERSON. • THE AUTHORISED PERSON WILL PROVIDE A CERTIFICATE OF COMPLIANCE. • A Gasmate NGC30 or NGC40 AGA approved natural gas pressure regulator must be installed in the pipeline and be set at 1 kPa.
SAFE APPLIANCE LOCATIONS This appliance shall only be used in an above ground open-air situation with natural ventilation, without stagnant areas, where gas leakage and products of combustion are rapidly dispersed by wind and natural convection. Any enclosure in which the appliance is used shall comply with the following: An enclosure with walls on all sides, but at least one permanent opening at ground level and no overhead cover.
JOINING MODULES - ASSEMBLY INSTRUCTIONS Tools Required Standard Phillips-head screw driver. IMPORTANT Remove all packing and transit protection before assembly. CAUTION: Ensure no packing material is left in To join your kitchen together use 2 wing screws and nuts BBQ before lighting. as shown.
Page 22
SINK MODULE - BQ2191 Add the shelves (total 2pcs) into the cabinet locating the rear pins through the back panel and securing with the clips then loosen the screws at each of the front corners (see diagram below). Finally secure by tightening the screws. Follow the below steps to install the water tap Insert the tap thread through the hole in the top and secure with the nut from underneath, inside the cabinet.
Page 23
STORAGE MODULE - BQ2192 Add the shelves (total 6pcs) into the cabinet in the same way as for the Sink Module. To take out shelves - Take out the clips at the back panel then loosen the screws at each of the front corners. Finally secure by tightening the screws.
Page 24
DRAWER MODULE - BQ2193 To take out drawers - push one tab up, one tab down to release the drawer as shown. For any queries or assistance call Customer Service (Australia Only) 1300 174 876 Hours of operation: Monday to Friday 8am - 5pm EST Do not return to place of purchase.
Need help?
Do you have a question about the NOVA BQ2090 and is the answer not in the manual?
Questions and answers