Advertisement
TIRE/RIM CLEARANCE
Your Cervélo bicycle complies with the ISO 4210-2:4.10.2 standard for tire clearance. In order to comply with these safety standards and
maintain your Limited Lifetime Warranty, a minimum of 4mm of clearance must remain between the tire and any frame element. Due to
the growing complexity of tire and rim interfaces, Cervélo recommends identifying the available space before choosing a tire.
Tire/Rim
Frame
Dimension
Clearance
21
1. Measure the space between the chainstays at
the bottom bracket junction.
2. Measure the space between the seatstays at the
top of the tire.
3. Using the smallest of those two numbers,
subtract 8mm (4mm per side) to determine the
remaining space.
4. With the tire installed and fully inflated on your
wheel, measure the widest of the rim or tire
width to ensure that it fits.
Contact between the tire or rim and the
frame or fork may result in a loss of control
while riding and potentially serious injury.
Failure to follow these guidelines may result
in damage to the frame not covered by
Cervélo Limited Lifetime Warranty.
NOTES
22
Advertisement
