Cleaning - Samsung NV7B666 Series User & Installation Manual

Operations
Deleting the Timer
1. Touch the button on the control panel.
2. Select Timer, and then press the Dial Knob.
3. On the Timer screen, select , and then press the Dial Knob.
4. Select Delete on the right side of the Timer you want to delete, and then press
the Dial Knob.
5. Select Done, and then press the Dial Knob.
Using the Timer
1. Touch the button on the control panel.
2. Select Timer, and then press the Dial Knob.
3. Select Start on the right side of the Timer you want to use, and then press the
Dial Knob.
- Once you start the timer, you can pause or cancel the timer.
NOTE
When the time has elapsed to a set point, a message of "Time is up." appears with
a melody. Select OK, and then press the Dial Knob to dismiss the message.
32 English

Cleaning

Pyrolytic (applicable models only)
Pyrolytic features high temperature thermal cleaning. It burns off oily leftovers to
facilitate manual cleaning.
1. Touch the button on the control panel.
2. Select Cleaning, and then press the Dial Knob.
3. Select Pyrolytic, and then press the Dial Knob.
4. Select the time, and then press the Dial Knob.
Select Next, and then press the Dial Knob.
5.
6. Follow the instruction on the screen, select Next, and then press the Dial Knob.
7. Read the message on the screen, select Start, and then press the Dial Knob.
8. Wait until the oven cools down, and then wipe the door along its edges using
a wet cloth.
CAUTION
• Do not touch the oven because the oven becomes very hot during the cycle.
• To avoid accidents, keep children away from the oven.
• After the cycle is complete, do not power off while the cooling fan is operating
to cool the oven down.
NOTE
• Once the cycle starts, the oven becomes hot inside. Then, the door will be
locked for safety. When the cycle is complete, and the oven cools down, the
door will be unlocked.
• Make sure you empty the oven before cleaning. Accessories can be deformed
due to high temperatures inside the oven.