Setting The Initial Account - Panasonic AW-HE20KP Operating Instruction

Setting the Initial Account

1. Set the initial account.
In the initial state, the initial account setting screen is displayed when the web screen is displayed.
Set a user name and password.
[Note]
 The usable symbols for user name is following (# % + = , - _ ^ / @ . ~)
 Do not set character strings that can be easily guessed by third parties.
 Change the password at regular intervals.
 The password must use at least 3 of the following 4 character types and be 8 characters or longer.
- Alphabet upper cases
- Alphabet lower cases
- Numerals
- Symbols (# % + = , - _ ^ / @ . ~ )
 When a password is set that does not adhere to the above policy, take responsibility for use of the device with due
consideration for the security risks in the installation environment, etc.
 A warning is displayed if the set password goes against the recommended setting policy. When changing the
password, click the [Back] button and set the password again.
 When continuing with the setting with full understanding of the security risks, click [Continue] to complete the
setting.
 If you forget the account information that was set, use the switches for initialization of service switches to reset the
user information used for connecting to the network. (→ page 23)
33