Setting To Initial Set - Panasonic AW-E860N Operating Instructions Manual

Setting to initial set

$ Setting to initial set
In case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of each
Use Mode. (See page 32.)
Press the YES/ABC switch, then [Initialize Data] screen
shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds to
return to the initial settings, the existing settings are
initialized, the screen shown at 2, and the camera
returns to main menu.
1
(3) If the NO/BAR switch is pressed, or if the YES/ABC
switch is not pressed, within about 10 seconds, the
screen shown at 3, and the camera returns to main
menu, and the existing settings are not initialized.
If you are using an option card, the Option Card
Setting Submenu will not be initialized even if "Return
to Initialize" is performed.
2
-56-
Note
3