Panasonic AW-HE20KP Operating Instruction page 94

P/T Speed mode
[Slow, Fast]
Set the pan/tilt operation speed during manual operation.
Factory settings: Slow
[Note]
When pan/tilt is being operated, the operation sound is louder at high speed compare with that at low speed.
For environment with operation sound concern, operate the pan/tilt at a low speed.
Speed with zoom POS.
[Off, On]
When [On] is set, if you adjust the zoom in the "Tele" direction, the panning and tilting operations will become slower
than usual.
Factory settings: On
Focus mode
[Manual, Auto]
"Auto" or "Manual" is set here for the focusing function. Setting value:
Auto The subjects are always brought into focus automatically.
Manual The focus is operated manually.
Factory settings: Auto
Focus ADJ with PTZ
[Off, On]
"Off" or "On" is set here for the function which compensates for out-of-focusing when it occurs during panning, tilting
or zooming operations at the manual focus setting.
This item can be selected only when "Manual" has been selected as the "Focus Mode" setting.
Factory settings: Off
Tally
[Enable, Disable]
"Enable" or "Disable" is set here for the function which turns on or turns off the tally lamp using the tally control
signal.
Factory settings: Enable
94