Panasonic AW-HE20KP Operating Instruction page 88

Speed with zoom POS.
[Off, On]
When [On] is set, if you adjust the zoom in the "Tele" direction, the panning and tilting operations will become slower
than usual.
This function has no effect during preset operations.
Factory settings: On
Focus ADJ with PTZ.
[Off, On]
"Off" or "On" is set here for the function which compensates for out-of-focusing when it occurs during panning, tilting
or zooming operations at the manual focus setting.
This item can be selected only when "Manual" has been selected as the "Focus Mode" setting.
This is only enabled when manual focus has been selected.
Factory settings: Off
Preset Setting

Preset speed table
[Slow, Fast]
Set the preset speed table (Slow, Fast).
During preset playback, preset actions are performed at Preset Speed (1 to 30) values that are based on the table set
here.
Slow: Set the preset speed table to "Slow".
Fast: Set the preset speed table to "Fast".
Factory settings: Fast
Preset speed
[1~30]
There are 30 preset pan-tilt operation speeds when regenerating the camera direction and other information which are
registered in the preset memory.
Setting range: 1 to 30
[Note]
If a high value is selected for the Preset Speed setting, the image on the screen may shake when operation stops.
Factory settings: 14
88