Panasonic AW-HE20KP Operating Instruction page 80

H.264/H.265

Set H.264/H.265 image settings.
Click [Set] to save the configuration.
[Note]
1. This is only enabled when Priority Mode is set to "IP".
2. Only JPEG images can be displayed on web screens.
Stream transmission
[Off, On]
Whether to transmit images is set here. The default is On.
[Note]
[Stream transmission] cannot be configured when the Priority Mode selection is anything other than "IP".
Codec
[H.264, H.265]
Select the H.264 or H.265 as the image codec.
Image capture size
[640x360, 1280x720, 1920x1080]
Select the resolution for H.264/H.265 images.
Frame rate
[5fps, 10fps, 15fps, 25fps, 30fps, 50fps, 60fps]
Set the frame rate for H.264 /H.265 images.
Max bit rate (per client)
[1024kbps, 1536kbps, 2048kbps, 3072kbps, 4096kbps, 6144kbps, 8192kbps, 10240kbps, 12288kbps, 14336kbps,
16384kbps, 20480kbps, 24576kbps, 32768kbps]
Specify the H.264/H.265 bit rate
The default is 14336kbps.
[Note] When bit rate is set higher than 8192kbps, the bit rate during RTMPS transmission will be 8192kbps.
50Hz 5fps, 10fps, 25fps, 50fps
59.94Hz/60Hz 5fps, 15fps, 30fps, 60fps
80