Basic Settings; Selecting Priority Mode - Panasonic AW-HE20KP Operating Instruction

Basic Settings

From the Setup menu click [Basic] button to display the Basic settings page.
In basic settings, user can select [Priority mode] and setup name of [Live

Selecting Priority Mode

Configure the setting for the priority output of video.
Click [Setup] > [Basic] > [Priority Mode]
Click [Set] to save the configuration.
HDMI/USB: HD format video is output to an external

monitor connected via an HDMI/SDI cable. Enables
the unit to be used as a Web camera. The camera
can also be controlled from a personal computer.
 IP: HD format video is output to an external monitor
connected via an HDMI/SDI cable. Enables IP image
transmission. The IP transmission of H.264/H.265
images is also supported. This unit cannot display
H.264/H.265 format images on the Live screen. To
display H.264/H.265 images, use an external device
or external software that supports H.264/H.265
images.
[Note]
 When "Priority Mode" is changed, OSD display and IP streaming may not work, as the unit may reconnect to the
RTMP server.
Under the USB (Video Conference) mode, in order to minimize the delay of UVC output, HDMI/SDI video output

and video output via IP transmission will be
 USB (Video Conference): Enables the unit to be
used as a Web camera. Specially tuned for online
meetings, the unit automatically goes into the
Standby mode when an online meeting comes to an
end; if an online meeting starts while the unit is in the
Standby on mode, the unit automatically switches
into the Power On mode.
In this mode, you cannot output video via HDMI or
SDI, and you cannot output video via IP
transmission. (Video output will not be possible
except via USB). Also, in this mode, the audio output
is forcibly turned off.
disabled.
76
page], and access [Date & Time].