Siemens HN978GQ 1 Series User Manual And Installation Instructions page 38

Hide thumbs Also See for HN978GQ 1 Series:
Table of Contents

Advertisement

en Rails
25.3 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
1.
Turn the intermediate pane until the arrow  ​ ⁠ is in
the top right.
2.
Insert the intermediate pane into the retainer
the bottom
​ ⁠ and push it in firmly at the top.
3.
Push the left- and right-hand retainer
until the intermediate pane is clamped  ​ ⁠ .
26  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
26.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
1.
Lift the rail forwards
38
​ ⁠ downwards
​ ⁠ and detach it
​ ⁠ .
4.
Attach the front pane downwards into the left- and
right-hand retainers
5.
Push the front pane to the appliance until the left-
and right-hand hook
6.
Push the front pane in at the bottom
hear it click into place.
7.
Open the appliance door slightly and remove the
tea towel.
8.
Screw both screws back in on the left and right of
the appliance door.
9.
Put the door cover in position and push down on it
​ ⁠ until you hear it click into place.
​ ⁠ at
10.
Close the appliance door.
Notes
¡ Do not use the cooking compartment again until the
door panes have been correctly fitted.
2.
Push the entire rail backwards
​ ⁠
​ ⁠ .
​ ⁠ is opposite the support
​ ⁠ until you
​ ⁠ and take it out
​ ⁠
​ ⁠ .
​ ⁠ .

Advertisement

Table of Contents
loading

Table of Contents