Siemens HN978GQ 1 Series User Manual And Installation Instructions page 10

Hide thumbs Also See for HN978GQ 1 Series:
Table of Contents

Advertisement

en Familiarising yourself with your appliance
Symbol
Meaning
WiFi signal strength for Home Connect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through
is no WiFi signal.
If there is an "x" at the symbol
is no connection to the Home Connect
server.
→ "Home Connect ", Page 30
Remote start with Home Connect is ac-
tivated.
→ "Home Connect ", Page 30
Remote diagnostics with Home Con-
nect for maintenance is activated.
→ "Home Connect ", Page 30
The camera in the cooking compart-
ment is activated.
→ "Camera", Page 10
Settings area
The settings area is shown in tiles.
The individual tiles show you the current selection op-
tions and settings that have already been implemented.
To select a function, press the corresponding tile.
Information is also shown in tiles.
To scroll to the left or right if there are several tiles,
swipe over the display.
Possible symbols in tiles
Symbol
Meaning
Enter the adjustment value via the num-
ber field.
Reset the setting value.
Close the tile.
Note: A blue dot or a blue star in a tile indicates that a
new function, a new favourite or an update was down-
loaded to your device using the Home Connect app.
Info line
Depending on the setting step, you can see additional
information about your setting at the bottom of the dis-
play and can carry out actions.
4.3 Buttons
You can use the buttons to directly select various func-
tions.
Button
Function
Switch the appliance on or off.
→ "Basic operation", Page 16
Directly select the microwave operating
mode.
→ "Microwave", Page 21
Select the timer.
→ "Setting the timer", Page 18
10
Button
​ ⁠ , there
​ ⁠ , there
4.4 Cooking compartment
Various functions in the cooking compartment provide
support when operating your appliance.
Shelf supports
The shelf supports in the cooking compartment enable
you to place accessories at different heights.
→ "Accessories", Page 13
Your appliance has 5 shelf positions. The shelf posi-
tions are numbered from bottom to top.
The shelf supports are equipped with pull-out rails on
one or more levels, depending on the appliance type.
You can remove the shelf supports, e.g. for cleaning.
→ "Rails", Page 38
Lighting
One or more oven lights illuminate the cooking com-
partment.
When you open the appliance door, the light in the
cooking compartment switches on. If the appliance
door remains open for longer than around 18 minutes,
the light switches off again.
For most operating modes, the lighting is switched on
during operation. The lighting switches off again when
the operation ends.
Camera
With the camera in the cooking compartment, you can
monitor the cooking process via the Home Connect
app.
With the "Dishes" operating mode, you can use the
browning sensor and set the individual browning of
your meal.
→ "Dishes", Page 26
You can find information on operating the camera in
the Home Connect app.
To use the camera, activate it in the basic settings.
→ "Basic settings", Page 29
Note: For reasons of data privacy, note that uninvolved
persons who spend time in the room could be filmed
with the camera through the appliance door.
Function
Press and hold for approx. 4 seconds:
Activate or deactivate the childproof
lock.
→ "Childproof lock", Page 29
Open the control panel to remove the
water tank.
→ "Filling the water tank", Page 19

Advertisement

Table of Contents
loading

Table of Contents