Table of Contents
Advertisement
Input/Output Terminals
For Computer/Video Input and Output
Input A
RGB/Y PB PR Input Terminal: Mini D-sub 15 pin (Female), G with sync/Y: 1 Vp-p±2 dB, sync negative, 75 Ω terminated,
RGB signal/PB PR signal: 0.7 Vp-p±2 dB, 75 Ω terminated, Sync signal: TTL level, high impedance, positive-negative
polarity
Audio Input Terminal: Stereo mini jack, Rated input: 500 mVrms, Input impedance: 47 kΩ or above
Input B/Input C
HDMI Input Terminal: 19-pin HDMI, HDCP
Audio Input Terminal: HDMI audio supported
Video Input
Video Input Terminal: Phono jack, 1 Vp-p±2 dB, sync negative, 75 Ω terminated
Audio Input Terminal: Shared with Input A
Output
Audio Output Terminal: Stereo mini jack, Stereo, 1 Vrms (maximum volume, when inputting 500 mVrms), Output
impedance: 5 kΩ
Other Terminals
RS-232C Terminal: D-Sub 9 pin (Male)
LAN Terminal: RJ45, 10BASE-T/100BASE-TX
USB Terminal: Type A
Power Supply/Other
Operating Temperature (Operating Humidity)
0 °C to 40 °C (32 °F to 104 °F) (20% - 80% (No condensation))
Storage Temperature (Storage Humidity)
−10 °C to +60 °C (14 °F to 140 °F) (20% - 80% (No condensation))
Power Requirements
VPL-CWZ10: 100 V to 240 V AC, 3.4 A – 1.5 A, 50/60 Hz
VPL-CXZ10: 100 V to 240 V AC, 3.4 A – 1.5 A, 50/60 Hz
Power Consumption
AC 100 V to 120 V
VPL-CWZ10: 342 W
VPL-CXZ10: 342 W
AC 220 V to 240 V
VPL-CWZ10: 326 W
VPL-CXZ10: 326 W
Standby Power Consumption (Standby Mode)
AC 100 V to 120 V
0.5 W (When setting [Standby Mode] to [Low])
AC 220 V to 240 V
0.5 W (When setting [Standby Mode] to [Low])
Standby Power Consumption (Network Standby Mode)
AC 100 V to 120 V
2.0 W (When setting [Standby Mode] to [Low] and [Remote Start] to [On])
15.0 W (If all network ports are connected) (When setting [Standby Mode] to [Standard])
AC 220 V to 240 V
2.0 W (When setting [Standby Mode] to [Low] and [Remote Start] to [On])
15.0 W (If all network ports are connected) (When setting [Standby Mode] to [Standard])
138
Advertisement
Table of Contents
