Table of Contents
Advertisement
Help Guide
Data Projector
VPL-CWZ10/CXZ10
Cleaning the Air Filter (For Installing to the Ceiling) (For the Customers in India only)
When the message that prompts cleaning the air filter appears, clean the air filter. If the dust cannot be removed from the
air filter even after cleaning, replace the air filter with a new one. For details on a new air filter, consult with qualified Sony
personnel.
Caution
If you continue to use the projector even after the message is displayed, dust may accumulate, clogging it. As a result,
the temperature may rise inside the projector, leading to a possible malfunction or fire.
Turn off the projector and disconnect the AC power cord from a wall outlet.
1
Remove the dust cover assembly by pressing the two levers and lifting it up.
2
Push all four sides of the dust cover to loosen the hook, and then remove the dust cover (A) from the filter
3
frame (B).
Remove the air filters (A) and (B) from the filter frame.
4
133
Advertisement
Table of Contents
