Help Guide
Data Projector
VPL-CWZ10/CXZ10
Menu Operation: Digital Shrink
Allows you to shrink the projected image or adjust its position.
Press the MENU key.
1
Select
[Installation] - [Digital Shrink] - The desired setting.
2
Settings
[Digital Shrink]
Adjust the size of the projected image. Setting the value to "0" will leave the image in its original size. The shrinkage rate
is 100% - 90%.
[Shift]
Adjust the projection position. The adjustable range changes depending on the shrinkage rate.
Note
Because digital shrinkage is an electronic form of correction, the image quality may be reduced.
While adjusting the digital shrinkage, pressing the ENTER key will take you to a shift adjustment menu.
5-014-280-13(1) Copyright 2020 Sony Corporation
88