Table of Contents
Advertisement
Help Guide
Data Projector
VPL-CWZ10/CXZ10
Menu Operation: Standby Mode
Set the power consumption during Standby Mode.
Press the MENU key.
1
Select
[Connection/Power] - [Standby Mode] - [Standard] or [Low].
2
Selecting [Standard] will increase the power consumption during Standby Mode.
Note
If Standby Mode is [Low], you will no longer be able to use networks and network control functions while in Standby Mode.
Hint
Setting [Remote Start] to [On] will turn the projector on by sending special commands even when [Standby Mode] is set to [Low].
5-014-280-13(1) Copyright 2020 Sony Corporation
82
Advertisement
Table of Contents
