Setting The Date And Time - Sony VPL-CWZ10 Help Manual

Help Guide
Data Projector
VPL-CWZ10/CXZ10

Setting the Date and Time

Set the date and time.
The time can be set from either [Use NTP server] or [Manual(Local)].
Click the [Setting] tab and display the [Setting] page.
1
Configure each item under the Date and Time and click [Apply].
2
Settings
[Current Date Time]
The currently set time will be displayed in the local time zone.
[Setting]
Enter the following items and set the date and time.
[Timezone]: Set the time zone. Daylight Savings Time is not supported.
[Use NTP server]: Select this if you are retrieving the time via a network (NTP server).
[NTP Server]: Enter the NTP server.
[Status]: Displays the status of the connection to the NTP server.
[latest server data]: Displays the information most recently obtained from the NTP server.
[Manual(Local)]: Select this if you will set the date and time manually.
[Date(yyyy-mm-dd)]: Enter the date.
[Time(hh:mm:ss)]: Enter the time.
5-014-280-13(1) Copyright 2020 Sony Corporation
106