Table of Contents
Advertisement
Setting the access limitation
You can limit a user for accessing any
particular page.
Administrator: Allowed access to all
pages
User: Allowed access to all pages except
the Setup page
When you access the Setup page for the first
time, input "root" as the user name and
"Projector" as the password in the
authentication dialog.
When you log in for the first time, the
window that prompts you to change the
password is displayed. Follow the
instructions on the screen to change the
password.
The name of the administrator is preset to
"root."
Entry area for Administrator
The password can be changed in the
Password page in the Setup page.
When you change the password, input a new
password after deleting the password
(*****) that was set.
The password of the administrator and user
should be 8 to 16 characters that includes
both alphabet and numeric characters.
Alphabet is case-sensitive.
The default password "Projector" cannot be
set as a new password.
Note
If you forget your password, consult with
qualified Sony personnel.
Entry area for User
The password will be reset with your
permission.
Confirming the Information
regarding the Projector
You can confirm the current settings for the
projector on the Information page.
Information area
Operating the Projector from
a Computer
You can control the projector from the
computer on the Control page.
Operation area
The functions of the buttons shown in the
operation area are the same as those of the
keys on the supplied Remote Commander.
Using the e-mail Report
Function
Set the e-mail report function on the Setup
page.
41
Advertisement
Table of Contents
