Diagnostics - JMA MULTICODE Manual

10.8 DIAGNOSTICS

On the adjustment screen we can also find the machine diagnostics area, here we can test the good operation of
motors.
Settings Diagnostics
After choosing diagnostics in the adjustment area, we will see the following screen.
1.- Continuous movement. This function moves the three axles.
2.- Advance axle X, axle, axle X advances one step.
3.- Reverse Motor X in checking. Send motor X to start.
4.- Advance axle Y, axle, axle Y advances one step.
5.- Reverse Motor Y in checking. Send motor Y to start.
6.- Advance axle Z, axle, axle Z advances one step.
7.- Reverse axle Z. Send motor Z to start.
8.- Speed. Loads optimal speeds, in the case of resetting values.
9.- Reset to Factory settings. Resets to all factory settings. This option is protected with a password, and we re-
commend only doing it with the help of the JMA technical service.
10.- Motor V. Starts turning the vertical axle (point and channel keys).
11.- Motor H. Starts turning the horizontal axle (toothed keys).
52