Search For Keys By Equivalents With Another Manufacturer (Equivalents Area) - JMA MULTICODE Manual

On the other hand, the software notifies when we have all the necessary information to cut the key, in the series box
(S). In this case, it notifies that with file 255P we can cut this key.

10.4.3 SEARCH FOR KEYS BY EQUIVALENTS WITH ANOTHER MANUFACTURER (EQUIVALENTS AREA)

This section of the program allows us to introduce references of keys that are not JMA references and will tell us the
JMA equivalent and on the other hand it will give tell us if the key can be cut or not in the Multicode.
The selector include (P) allows us to search those words that include the wanted reference, if it is chosen, it will only
show the keys that start with that reference.
In the search by key reference system we should press the search button (F) to make the search and later press the
erase button (D) to make any other search with another word.
Filter of Manufacturers of blank
keys
Key reference box
Result of key
containing that
reference.
Information about the
lock manufacturer
corresponding to that
key reference.
38
P
F
Manufacturers of keys that have that
key reference
D D
!