Using The Fax Menu - Lexmark 5400 Series Setup

3
If you do not want to change a setting, press Start Color or Start Black.
4
If you want to change a setting, press
5
Press or repeatedly until the menu item you want appears.
6
Press .
7
Press or repeatedly until the submenu item you want or the setting you want appears.
8
Press .
Note: Pressing selects a setting. An * appears next to the selected setting.
9
To go into additional submenus and settings, repeat step 7 and step 8 as needed.
10
If needed, press
11
Press Start Color or Start Black.
Use this
1
Quality
1
Original Size
Tools
1
Temporary setting. For information on saving temporary and other settings, see "Saving settings" on page 14.

Using the Fax menu

To access and navigate the Fax menu:
1
From the control panel, press Fax Mode.
The fax default screen appears.
2
If you do not want to change a setting, enter the fax number and press Start Color or Start Black.
3
If you want to change a setting, press
4
Press or repeatedly until the menu item you want appears.
5
Press .
6
Press or repeatedly until the submenu item you want or the setting you want appears.
7
Press .
Note: Pressing selects a setting. An * appears next to the selected setting.
8
To go into additional submenus and settings, repeat step 6 and step 7 as needed.
.
repeatedly to return to the previous menus and make other setting selections.
To
Adjust the quality of a scan.
Specify the size of the original document.
•
Maintenance
–
View ink levels.
–
Clean cartridges.
–
Align cartridges.
–
Print a test page.
•
Device Setup—Customize printer setup settings.
•
Defaults—Customize printer settings.
.
11