Removing the Lower Stage
1
Press the Release button on the control panel. A flashing green light indicates that the attachment can
be unplugged. Refer to
2
Disconnect the power cable and fluid hoses. Refer to
3
Press the Release button again. A continuous green light indicates that you can remove the attachment.
4
Remove the attachment from the rheometer.
NOTE: The release state will stay active for 10 seconds and then revert to locked.
DHR/AR Series Peltier Plate Getting Started Guide
step 1
in the previous section for Release button location.
Figure 12
in the previous section, if needed.
Page 20