Table of Contents
Advertisement
9 [Image/Audio] for setting images and sound files
9.4 [Image quality] to set the image quality
[Mask area]
When the mask area is set, the set area can be masked and the light intensity can be adjusted. If
[Super Dynamic] is set to [On], it cannot be set.
For details on how to set the mask area, refer to the following.
→9.4.2 Set the mask area
Light intensity control mode
[Light control mode]
Select the mode to control the light intensity from the following.
[Outdoor scene]:The brightness (illumination) controls the light intensity by combining the
electronic shutter and automatic aperture. This setting is used when shooting bright subjects such
as outdoors. Be careful not to flicker under fluorescent lights, etc.
[Flickless (50 Hz)]/[Flickless (60 Hz)]:Flicker is automatically corrected with a fluorescent lamp.
50 Hz/60 Hz will be used differently in different regions.
ELC:The electronic shutter is used to control the light intensity.
[Fix shutter]:
If [Image capture mode] is [Single source [4:3](30fps mode)]/[Dual sources [4:3](15fps mode)]:
[1/30 fixed], [3/120 fixed], [2/100 fixed], [2/120 fixed], [1/100 fixed], [1/120 fixed], [1/250
fixed], [1/500 fixed], [1/1000 fixed], [1/2000 fixed], [1/4000 fixed], or [1/10000 fixed]
If [Image capture mode] is [Single source [4:3](25fps mode)]/[Dual sources [4:3](12.5fps mode)]:
[1/25 fixed]/[3/100 fixed]/[2/100 fixed]/[1/100 fixed]/[1/250 fixed]/[1/500 fixed]/[1/1000
fixed]/[1/2000 fixed]/[1/4000 fixed]/[1/10000 fixed]
If [Image capture mode] is in [60fps mode]:
[1/60 fixed]/[1/100 fixed]/[1/120 fixed]/[1/250 fixed]/[1/500 fixed]/[1/1000 fixed]/[1/2000
fixed]/[1/4000 fixed]/[1/10000 fixed]
If [Image capture mode] is in [50fps mode]:
[1/50 fixed]/[1/100 fixed]/[1/250 fixed]/[1/500 fixed]/[1/1000 fixed]/[1/2000 fixed]/[1/4000
fixed]/[1/10000 fixed]
[Note:]
・[MULTI] When [Common(Cam. 1-2)] is selected in [Camera selection], the mask
area cannot be set. Set for each camera.
Advertisement
Table of Contents
