Horizontal Blades - Daikin FTXM35K3V1B Removal Procedure

Si041259EA

4. Horizontal Blades

Warning
Step
Open the horizontal
1
blade.
Unfasten the center
2
shaft while bending the
horizontal blade (large)
slightly.
Unfasten the left shaft.
3
Unfasten the right shaft
4
and remove the
horizontal blade (large).
Remove the horizontal
5
blade (small) in the
same way.
Removal Procedure
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Horizontal blade (large)
(R19028)
(R19030)
1. Since the key pattern hook is
2. Fit the blade to the center
(R19031)
Horizontal Blades
Points
The center shaft can be
released easily by bending
the blade.
(R19029)
Installation procedure
provided, rotate the blade
and fit it to the right shaft
first.
and left shafts.
When reassembling, mount
the large horizontal blade to
the upper position and the
small horizontal blade to the
lower position.
Do not put them in the wrong
place.
5