Table of Contents
Advertisement
Quick Setup: Inputs
The Quick Setup Inputs pages allow you to add and configure the inputs (sources) that are installed as
part of your design. You can rename each input for easy identification and inputs can be configured
independently of one another.
Note: PowerSpace+ amplifiers allow a maximum of four inputs.
To configure inputs using Quick Setup:
1. The first Inputs page lists the available input types and asks, "How many inputs, including
microphones, are in your system?" Use the up and down arrows or type directly in the text box
to specify the number of inputs in your system and then click Continue.
2. On the next page, enter a name for the input in the Label x text box.
3. In the Input Channel drop-down list, select the channel that will feed the input.
4. In the Type drop-down list, select the audio input type of the selected input.
Note: For both the P4150+ and the P4300+ amplifiers:
Input channels 1 and 2 support balanced line-level inputs (Euroblock) or unbalanced inputs
l
(Stereo RCA).
Input channel 3 supports balanced line-level inputs (Euroblock) inputs.
l
Input channel 4 supports balanced line-level inputs (Euroblock) inputs, a 600 Ohm telephone
l
paging input, or a PTT/VOX (push-to-talk / voice-operated exchange) dynamic microphone
input.
5. Select the Stereo check box (if available) if you wish to configure two input channels as a stereo pair.
Notes:
The Stereo check box becomes available only after you assign a channel and an appropriate
l
input type, and if the adjacent channel to be paired is currently unassigned.
Stereo can only be enabled on Euroblock input types. The Stereo check box is not available for
l
RCA and paging input types.
When the Stereo check box is enabled, the Input Channel drop-down list contains pairs of
l
adjacent input channels and the first available pair is automatically assigned. You can choose
a different channel pair (if available) from the Input Channel drop-down list.
When stereo is enabled, "Stereo" appears under the selected input's label.
l
6. Click the Mute icon if you wish to prevent audio from passing from the selected input to the output.
7. Click the Switch toggle (if available) to specify the paging input activation mode as
PTT (Push-to-talk) or VOX (voice-operated exchange).
IMPORTANT: The Switch option is only available for paging input types, which are only available
on the last input channel (Channel 4).
8. Click Continue.
Note: Repeat this procedure for each input in your system. The
have finished configuring all inputs and clicked Continue.
Bose PowerSpace+ Configuration Utility User Guide
Outputs
- 6 -
page opens after you
Advertisement
Table of Contents
