Table of Contents
Advertisement
Settings: Import / Export
The Import / Export page allows you to import and export device configuration files.
Device
The Device section allows you to import (upload) configuration files to the device or export (download)
configuration files from the device.
To import a device configuration file:
1. Ensure that the file you want to import to the device is loaded onto your computer.
2. Under Device, click Import.
3. In the Open dialog box, locate and select the file to be imported, and then click Open.
Note: If you cannot locate the file in the Open dialog box, select All files from the drop-down list that
appears to the right of the File name box.
The amplifier automatically enters Standby mode (if it isn't already in that state) and one of two
messages appears depending upon whether I-Share is enabled in the imported configuration file.
- If I-Share is enabled in the imported configuration file, the following message appears:
"Verify all inputs and outputs are connected to the amplifier, as well as required
The amplifier is in standby mode and I-Share will be enabled when the amplifier is turned on from
the front-panel power button, or by disabling standby mode in the
- If I-Share is not enabled in the imported configuration file, the following message appears:
"Verify all inputs and outputs are connected to the amplifier. The amplifier is in standby mode
and can be turned on from the front-panel power button, or by disabling Standby mode in the
SUMMARY tab."
4. Click Complete.
5. If you want to take the amplifier out of Standby mode and place it into Full Power mode, do one of
the following:
- Press the Power button on the front panel.
Standby Mode
- Disable the
Note: If I-Share was enabled in the imported configuration file, it will remain inactive until the
amplifier is turned on.
To export a device configuration file:
1. Under Device, click Export.
2. In the lower-left corner of the browser window, right-click the exported file and select Show in folder
from the file menu.
3. In the computer's Downloads folder, locate the exported file and copy or move it to the
desired location.
Bose PowerSpace+ Configuration Utility User Guide
option in the PowerSpace+ Configuration Utility.
SUMMARY
- 14 -
I-Share
jumpers.
tab."
Advertisement
Table of Contents
