Table of Contents
Advertisement
Configuration: Inputs
The Inputs page allows you to add, remove, and configure inputs (sources). Each input can be named
for easy identification and inputs can be configured independently of one another.
Note: PowerSpace+ amplifiers allow a maximum of four inputs.
Input Setup
The Input Setup area lists any existing inputs and allows you to add a new input, edit the name of an
input, or delete an input.
To add an input:
Under Input Setup, click Add
l
Note: The Add button becomes unavailable after the maximum number of inputs is reached.
To edit the name of an input:
1. Under Input Setup, in the text box that contains the input name that you want to edit, click Edit.
Note: The Edit icon appears when you hover over the text box.
2. Type a new name for the input and then press Enter.
To delete an input:
1. Under Input Setup, in the text box that contains the name of the input that you want to delete,
click Delete.
Note: The Delete icon appears when you hover over the text box, and only when at least two
inputs exist.
2. In the Warning dialog box, click Yes to remove the input, or click No to cancel the process.
Details
The Details section of the Inputs page allows you to configure certain settings for the selected input.
Settings vary depending upon the input type.
To configure details for an input:
Under Input Setup (at the top of the page), click the name of the input you want to configure, if
it is not already selected.
Note: When selected, the input name box appears as white text on a black background.
You can then configure the following settings as applicable:
Stereo: You can configure input channels as stereo pairs by selecting the Stereo check box.
l
This allows you to assign a pair of adjacent input channels by selecting the pair (channels 1 and 2,
or channels 3 and 4) from the Input Channel drop-down list. Clear the Stereo check box if you
want to configure the input as mono.
Notes:
The Stereo check box becomes available only after you assign a channel and an appropriate
l
input type, and if the adjacent channel to be paired is currently unassigned.
Stereo can only be enabled on Euroblock input types. The Stereo check box is not available for
l
RCA and paging input types.
When the Stereo check box is enabled, the Input Channel drop-down list contains pairs of
l
adjacent input channels and the first available pair is automatically assigned. You can choose
Bose PowerSpace+ Configuration Utility User Guide
, and then edit the input name (described below).
- 18 -
Advertisement
Table of Contents
