Configuration: Auxiliary Output - Bose Professional PowerSpace+ Series User Manual

Configuration: Auxiliary Output
PowerSpace+ amplifiers include two additional, independent (auxiliary) outputs that you can configure on
the Auxiliary Output page of the Configuration tab:
Music On Hold (MOH): Dedicated 600 Ohm music-on-hold interface for simple integration into a
l
phone system.
Line Level Output: Line-level auxiliary output.
l
Music On Hold
The dedicated 600-Ohm Music on Hold (MOH) interface provides simple integration into a PBX phone
system and allows you to play music from a selected source over a phone line while a caller is on hold.
You can configure the following Music on Hold settings:
Enable Transformer (600 Ω): Click the toggle to enable or disable the output-balancing transformer
l
for MOH.
Gain: Click the up and down arrows or type directly in the text box to specify the gain within the -16.0
l
to +16.0 range (in 0.5 dB increments).
Input: Select the MOH input source from the drop-down list.
l
Line Level Output
The line-level auxiliary output enables you to route the signal to additional audio equipment.
You can configure the following Line Level Output settings:
Enable Aux Line Out: Click the toggle to enable or disable the line-level auxiliary output.
l
Gain: Click the up and down arrows or type directly in the text box to specify the gain within the -16.0
l
to +16.0 range (in 0.5 dB increments).
Input: Select the input source that you wish to use for the auxiliary output from the drop-down list.
l
Bose PowerSpace+ Configuration Utility User Guide
- 25 -