Quick Setup: Listening Areas - Bose Professional PowerSpace+ Series User Manual

Quick Setup: Listening Areas

The Listening Areas pages in Quick Setup allow you to add and configure listening areas based on the
distinct physical areas of your installation space.
Note: You can configure up to four independent listening areas.
To configure listening areas using Quick Setup:
1. The first Listening Areas page provides listening area examples and asks, "How many separate
listening areas are in your system?" Use the up and down arrows or type directly in the text box
to specify the number of listening areas, and then click Continue.
2. On the next page, enter a name for the listening area in the Area x text box.
3. Under Select INPUTS that will be used in this Listening Area, specify whether you want to make any
of the inputs listed in the Inputs column available for the listening area by selecting the check box.
4. Under Select OUTPUTS to route audio to this Listening Area, select the check box for any output that
you want to assign to the listening area.
Note: You can select multiple outputs for a listening area, but once an output is assigned, it is
unavailable to other listening areas.
5. In the Type drop-down list, select the type to specify whether the output is Unassigned, Mono, Left,
or Right.
Note: The Left and Right options appear when the selected input is configured as Stereo.
6. Click the up and down arrows or type directly in the Gain text box to adjust the gain. The range of
adjustment for the Gain setting is from -60 dB to +12 dB.
7. Click the Mute icon if you wish to disable audio and prevent it from passing from the selected input to
the output.
8. Click Continue.
Note: Repeat this procedure for each listening area in your system. The
opens after you have finished configuring all listening areas and clicked Continue.
Bose PowerSpace+ Configuration Utility User Guide
- 8 -
Quick Setup Complete page