Table of Contents
Advertisement
Dashboard: Summary
The Summary page of the Dashboard tab is a visualization tool that provides a real-time account of the
overall system status.
The system information provided on this page includes:
Live Meter: When the device is in Full Power mode, provides a real-time temperature measurement
l
within a color-coded range that is dependent upon the internal temperature measurement and
fan speed.
Color:
Indicates:
Green
Safe Operating Zone
Yellow Thermal Warning Zone
Red
Thermal Fault - Amp Muted Highest fan speed, amp outputs are muted (protection mode)
Standby Mode: When enabled, this function immediately enters the amplifier into a power-saving
l
state (Standby), allowing the system to consume less power. Click the Standby Mode toggle to
enable Standby mode, or disable it and immediately place the amplifier into Full Power mode.
Notes:
When Standby mode is enabled, the meter shows the last temperature reading when the device
l
was in Full Power mode (before Standby mode was enabled).
You can configure the amplifier to automatically enter and exit Standby mode by enabling the
l
Auto Standby
For more information, see
l
Inputs: Provides a visual summary of the inputs that are configured in your system.
l
- Signal: Replicates the Input Signal LEDs on the front of the amplifier. Each LED is associated with a
single input and uses color-coded status indicators.
Color:
Indicates:
Gray
No input signal / Off
Green
Signal is present
Amber Signal is near clipping
Red
Signal is clipping
- Input Meters: Provides a current visual representation of the signal level for all inputs in the system.
Outputs: Provides a visual summary of all outputs that are configured in your system.
l
- Limiters: Provide a current visual representation of the status of the
Power and Loudspeaker limiters.
Power: Replicates the Output Limit LEDs on the front of the amplifier. Each LED is associated
l
with an output and uses color-coded status indicators.
Color:
Gray
Amber
Red (Solid)
Red (Blinking) Amplifier is muted
Bose PowerSpace+ Configuration Utility User Guide
Conditions:
Low temperatures and low fan speed
Hotter operation and mid fan speed
option on the Amplifier page of the Settings tab.
Appendix D: PowerSpace+ Amplifier Power
Indicates:
Off
Amplifier is limiting output (power)
Fault
- 32 -
States.
Advertisement
Table of Contents
