Table of Contents
Advertisement
Configuration: Listening Areas
The Listening Areas page allows you to add, remove, and configure listening areas (zones) based on the
physical areas of your installation space. Listening areas can be named for easy identification and can be
configured independently of one another.
Notes:
You can configure up to four independent listening areas.
l
You can click the tabs at the top of the Listening Areas page to quickly locate a specific section.
l
Listening Areas
This Listening Areas section lists any existing listening areas and allows you to add a new listening area,
edit the name of a listening area, or delete a listening area.
To add a listening area:
At the top of the page under Listening Areas, click Add
l
(described below).
Note: The Add button becomes unavailable after a fourth listening area is added.
To edit the name of a listening area:
1. Under Listening Areas, in the box that contains the name of the listening area that you want to edit,
click Edit.
Note: The Edit icon appears when you hover over the text box.
2. Type a new name for the listening area and then press Enter.
To delete a listening area:
1. Under Listening Areas, in the box that contains the name of the listening area that you want to delete,
click Delete.
Note: The Delete icon appears when you hover over the text box, and only when at least two listening
areas exist.
2. In the Warning dialog box, click Yes to remove the listening area, or click No to cancel the process.
Configuring a Listening Area
Under Listening Areas, click the name of the listening area you want to configure. When selected, the
listening area name box appears as white text on a black background. You can then configure controllers,
routing details, area gain, area EQ, and area paging settings, as applicable.
Area Controller
The Bose CC-1, CC-2 , and CC-3 Zone Controllers are a series of wall-mounted interfaces that are
engineered to provide custom on-site volume controls.
CC-1 provides volume control
l
CC-2 provides volume control and A/B source selection
l
CC-3 provides volume control and A/B/C/D source selection
l
Click the Controllers toggle if you wish to enable a controller for the selected listening area. When you
enable a controller for a listening area, you must also specify:
Bose PowerSpace+ Configuration Utility User Guide
, and then edit the listening area name
- 26 -
Advertisement
Table of Contents
