Fans - GE ApexPro Service Manual

Fans

4-8
Maintenance: Cleaning
For component level disassembly/reassembly information, refer to
Assembly" on page 6-4.
Remove all of the dust from the fans and the fan intakes. The fans and fan intakes
usually accumulate the most dust. Accumulated dust can clog the fans and fan
intakes and prevent proper cooling.
The ApexPro Telemetry Server is equipped with two fan filters at the front of the
chassis. These filters reduce the amount of dust and cooling air in the interior of the
unit.
Fan and drive filters should be replaced regularly. See
"Drive Filter" on page 6-9.
ApexPro Telemetry Server
2001989-178
"Disassembly/
"Fan Filter" on page 6-7 and
Revision C