Apexpro Ptsconfig Utility - GE ApexPro Service Manual

ApexPro PTSCONFIG Utility

PTSCONFIG Utility Commands
display Commands
Revision C
Equipment Overview: Service Utilities
The PTSCONFIG utility is a console application that allows you to configure the
ApexPro application.
To access the PTSCONFIG utility:
1. Select Start > Run.
2. Type cmd. Press Enter.
3. Type cd<space>../../. Press Enter.
4. Type cd<space>program<space>files/marquette/pts/<ApexPro Telemetry
Server version>. Press Enter.
127(
The current software version of the ApexPro Telemetry Server should
replace <ApexPro Telemetry Server version> in this string.
5. Type ptsconfig. Press Enter.
127(
Not all of the commands in the following table may apply to every type of
ApexPro telemetry system.
The commands listed below display ApexPro application information.
Command
help
display<Space>tower
display<Space>software
display<Space>build
display<Space>patient
display<Space>patreceiver
display<Space>IP
display<Space>rack
display<Space>receiver
ApexPro Telemetry Server
2001989-178
Displays
Returns a list of available commands.
Displays ApexPro tower's full name "UNIT|NAME".
Displays software versions for all running software
(main, rack, etc.).
Displays software build date/time.
Displays patient information: TTX, tower, and receiver
numbers.
Displays information about the patient' receiver and
transmitter.
Displays IP address used by the ApexPro application to
talk to the Unity Network.
Displays IP address used by the ApexPro application to
talk to the telemetry system.
Displays receiver/unit assignments for this ApexPro
tower.
2-35