Advertisement
Quick Links
Professional Series Models
Model
Width
PSL736
34 - 3/8"
PSL742
40 - 3/8"
PSL748
46 - 3/8"
PSL754
52 - 3/8"
PSL760
58 - 3/8"
PSL736-6
34 - 3/8"
PSL742-6
40 - 3/8"
PSL742-12
40 - 3/8"
PSL748-12
46 - 3/8"
PSL754-12
52 - 3/8"
PSL760-12
58 - 3/8"
*These models connect to an In-Line, Roof or Wall-
Mounted Remote Blower. The blower used
determines the CFM.
CONTENTS:
Part 1 - Planning The Installation
Part 2 - Securing The Liner
Part 3 - Use & Care
Part 4 - Electrical Connection (Give copy of these 2 pages to electrician.)
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
Installer:
Please leave Installation Instructions with the range hood liner.
Owner:
Please keep Installation Instructions for local electrical inspector's use and for future reference.
WARNINGS: Must be followed carefully to avoid personal injury.
IMPORTANT: Must be followed carefully to avoid damage or incorrect installation.
TIPS: Contain helpful information to facilitate installation.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
PERSONS OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
manufacturer at the address or telephone number listed in the warranty.
Item No. 0BL-00-001
Revised 10/19/07
Type of
CFM
Motor &
Blower
*
Remote
*
Remote
*
Remote
*
Remote
*
Remote
660
Internal
660
Internal
1360
Internal
1360
Internal
1360
Internal
1360
Internal
READ AND SAVE THESE INSTRUCTIONS
Copyright © 2007 Universal Metal Industries, Inc.
INSTALLATION INSTRUCTIONS &
USE & CARE GUIDE
®
Trade-Wind
Professional Series Liners
Page 1
Advertisement
Related Manuals for Trade-wind Professional PSL736
Summary of Contents for Trade-wind Professional PSL736
- Page 1 INSTALLATION INSTRUCTIONS & USE & CARE GUIDE ® Trade-Wind Professional Series Liners Professional Series Models Type of Model Width Motor & Blower PSL736 34 - 3/8” Remote PSL742 40 - 3/8” Remote PSL748 46 - 3/8” Remote PSL754 52 - 3/8”...
- Page 2 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag to the service panel. 3.
- Page 3 In-Line Blowers, it is highly recommended that the blower NOT ® be attached directly to the liner or in a chase immediately above the liner unless a Trade-Wind brand duct silencer is installed between the blower and liner and neoprene lined FC Clamps are used. FC Clamps are ®...
- Page 4 Important Cut-out Information To ensure the best fit possible frame to the actual Trade-Wind liner that is to be installed. Dimensions Models Width PSL736 34 - 3/8” 8” PSL742 40 - 3/8” 10” PSL748 46 - 3/8” 10” PSL754 52 - 3/8”...
- Page 5 THROUGH FILTER BRACKETS, ELECTRICAL COMPONENTS OR UL LABEL. ® Because the Trade-Wind Professional Series Liner was designed for various wood hood applications, no mounting holes have been pre-drilled. This allows the liner to be attached in most any area of the canopy that has a wood frame support, e.g., the back, sides or top.
- Page 6 HALOGEN LIGHT BULBS: ® Trade-Wind liners are designed for Par 20 halogen lamps. They can be purchased at most home or grocery stores, e.g., Lowe’s, McCoy’s, Menards, Ace True Value and Home Depot. Item No. 0BL-00-001 Revised 10/19/07 Copyright ©...
- Page 7 (either in-line or roof top). If the ventilator is rated in watts ® rather than amps, divide the watts by 120 and this will give you the amperage rating. The Trade-Wind liner is supplied with a 5.0 amp variable speed fan control.
- Page 8 Wiring Diagrams IMPORTANT: Copy this page and previous page to your electrical installer. Diagram 1: Models with 660 & 1360 CFM Internal Blowers House Electrical Models: Panel Green PSL736-6 White PSL742-6 120V Black PSL742-12 PSL748-12 PSL754-12 PSL760-12 Liner Diagram 2: Models Connected to Variable Speed Blowers House Electrical Models: Panel...
- Page 9 Professional Series Kitchen Ventilation Products What is Covered ® Universal Metal Industries, Inc., warrants its Trade-Wind Professional Series kitchen ventilation products to the original user, to be free of defects in materials and workmanship for one (1) year from the date of purchase.
Need help?
Do you have a question about the Professional PSL736 and is the answer not in the manual?
Questions and answers