Advertisement
Quick Links
Advertisement
Related Manuals for Elo TouchSystems 63 Series
Summary of Contents for Elo TouchSystems 63 Series
- Page 1 Quick Installation Guide 63 Series Open Frame Touchscreens Revision B P/N E403930 www.EloTouch.com...
- Page 2 Flush Mount (3263L) Please refer to the dimensional drawing located in the resource section of the product page on elotouch.com. 1. Attach bracket “A” to touchmonitor with 2x M4 hex screws (included), 2 brackets on each side of the display (total 8 brackets).
- Page 3 4. Adjust depth of brackets “C” such that the faces of the brackets sit below the touchscreen surface approximately the same distance as the enclosure thickness. Tighten the screws holding brackets “C”. 5. Place touchmonitor into enclosure opening from back side, taking care not to damage the touchscreen glass edge.
- Page 4 Flush Mount (4363L) Please refer to the dimensional drawing located in the resource section of the product page on elotouch.com. Black mylar 1. Install included sealing foam around perimeter of touchmonitor. a. Peel back 2-3” of release liner from foam seal. Sealing foam b.
- Page 5 4. Attach bracket “B” to bracket “C” loosely with 2x M4 hex screws (included), 2 brackets on each side of the display (total 8 brackets). 5. Adjust depth of brackets “B” such that the faces of the brackets sit below the touchscreen surface the same distance as the monitor mounting thickness.
- Page 6 Rear VESA Mount A VESA-compliant mounting pattern for M6 screws is provided on the rear of the monitor. Pattern varies for each model. Drawing is for illustration purposes only. Please refer to the dimensional drawing located in the resource section of the product page on elotouch.com.
-
Page 7: Troubleshooting
Cover Glass Installation Enclosure Elo Open Frame PCAP Touchscreens support protective cover glass. Cover glass must be installed with no air gap to Open Frame the Touchscreen glass. Touch Thru mode must be Touchscreen enabled to use cover glass. Cover Glass To enable Touch Thru mode: 1. - Page 8 Go to www.elotouch.com/support to download user manual. 请访问 www.elotouch.com.cn 获取用户手册 请保留备用 In order to prevent image retention (aka: image sticking, or image burn-in), please use a dynamically changing screensaver or turn off the display when not in use. Note: Image retention is not covered by your warranty. No touch driver installation needed Aucune installation de pilote nécessaire tactile No hay instalaciones de controlador toque necesario...