Advertisement
4. Adjust depth of brackets "C" such that the faces of the brackets sit below
the touchscreen surface approximately the same distance as the
enclosure thickness. Tighten the screws holding brackets "C".
5. Place touchmonitor into enclosure opening from back side,
taking care not to damage the touchscreen glass edge.
6. Secure touchmonitor to enclosure per dimensional drawing,
ensuring monitor is centered in opening. Adjust brackets "C" if glass
is not flush to enclosure. Seal gap between touchscreen glass
and enclosure using silicone, masking off touchscreen to ensure
no silicone leaks onto front of glass.
Gap between touchscreen
and enclosure
Advertisement
