Elo TouchSystems 64 Series Quick Installation Manual

Connections
1. Connect DC power.
2. Connect Touch USB-C cable from touch display to computer.
3. If video through USB-C is not being used, connect HDMI or DisplayPort
from touch display to computer.
OSD MENU
HDMI
DISPLAYPORT
TOUCH USB-C
DC POWER IN
POWER BUTTON
Learn more about Elo at EloTouch.com
America Europe (EMEA)
Tel +1 408 597 8000 Tel +32 16 930 136
EloSales.NA@elotouch.com EMEA.sales@elotouch.com
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively "Elo") makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc.
© 2024 Elo Touch Solutions, Inc. All rights reserved.
ET1064 Shown as example
Asia Pacific
Tel +86 (21) 3329 1385
EloAsia@elotouch.com
Quick Installation Guide
MANUAL, QIG,
64 SERIES, NO DRIVER
www.EloTouch.com
Revision 2
P/N E143738